SERVICE AND ADJUSTMENTS

TO CHECK BRAKE

If tractor requires more than five (5) feet to stop at highest speed in highest gear on a level, dry concrete or paved surface, then brake must be serviced.

You may also check brake by:

1.Park tractor on a level, dry concrete or paved surface, depress brake pedal all the way down and engage parking brake.

2.Disengage transmission by placing freewheel control in “transmission disengaged” position. Pull freewheel control out and into the slot and release so it is held in the disengaged position.

The rear wheels must lock and skid when you try to manually push the tractor forward. If the rear wheels rotate, then the brakeneedstobeserviced.Contactaqualifiedservicecenter.

TO REPLACE MOTION DRIVE BELT (See Fig. 30)

Park the tractor on level surface. Engage parking brake. For assistance, there is a belt installation guide decal on bottom side of left footrest.

BELT REMOVAL -

Remove mower (See “TO REMOVE MOWER” in this section of manual).

NOTE: Observe entire motion drive belt and position of all belt guides and keepers.

Remove clutch locator.

Remove belt from clutching idler and all stationary idlers.

Remove belt downward from engine pulley and around clutch.

Pull belt slack toward rear of tractor. Carefully remove belt upwards from transmission input pulley and over cooling fan blades.

BELT INSTALLATION -

Carefully work new belt down around transmission cooling fan and onto the input pulley.

Pull belt toward front of tractor and roll belt around clutch and onto engine pulley.

Install belt through all stationary idlers and clutching idler.

Reinstall clutch locator and tighten nut securely.

Make sure belt is in all pulley grooves and inside all belt guides and keepers.

Install mower (See “TO INSTALL MOWER” in this sec- tion of manual).

CLUTCH

CLUTCHING

IDLER

STATIONARY

IDLER

FAN

CLUTCH

LOCATOR

02379

Fig. 30

TRANSMISSION REMOVAL/REPLACEMENT

Should your transmission require removal for service or replacement, it should be purged after reinstallation and beforeoperatingthetractor. See“PURGETRANSMISSION” in the Operation section of this manual.

TRANSAXLE MOTION CONTROL LEVER NEUTRAL ADJUSTMENT(See Fig. 31)

The motion control lever has been preset at the factory and adjustment should not be necessary.

Loosen adjustment bolt in front of the right rear wheel, and lightly tighten.

Start engine and move motion control lever until tractor does not move forward or backward.

Hold motion control lever in that position and turn engine off.

While holding motion control lever in place, loosen the adjustment bolt.

Move motion control lever to the neutral (N) (lock gate) position.

Tighten adjustment bolt securely.

NOTE: If additional clearance is needed to get to adjustment bolt, move mower deck height to the lowest position.

After above adjustment is made, if the tractor still creeps forward or backward while motion control lever is in neutral position, follow these steps:

Loosen the adjustment bolt.

Move the motion control lever 1/4 to 1/2 inch in the direction it is trying to creep.

Tighten adjustment bolt securely.

Start engine and test.

If tractor still creeps, repeat above steps until satisfied.

MOTION CONTROL

NEUTRAL

LEVER

LOCK

 

GATE

 

ADJUSTMENT

 

BOLT

Fig. 31

24

Page 24
Image 24
Poulan PP16H36RB, 96061015703 To Check Brake, To Replace Motion Drive Belt See Fig, Transmission REMOVAL/REPLACEMENT

960 61 01-57, 96061015703, PP16H36RB specifications

The Poulan PP16H36RB, model number 96061015703, is a robust and versatile lawn mower designed to tackle various landscape maintenance tasks with ease. It embodies a powerful combination of features and technologies that cater to both novice and experienced users, making lawn care an enjoyable and efficient chore.

At the heart of the Poulan PP16H36RB is a reliable 16 horsepower Briggs & Stratton engine, ensuring ample power to navigate tough terrain and handle thick grass effortlessly. The engine is designed for efficiency and longevity, providing smooth operation and requiring minimal maintenance. This engine is paired with a user-friendly electric start feature, allowing for quick and hassle-free ignition.

One of the standout features of this model is its wide cutting deck, which measures 36 inches. This generous width enables the mower to cover more ground in a single pass, significantly reducing mowing time. The cutting deck is equipped with durable, sharp blades that provide a clean, precise cut, promoting a healthy lawn. The mower also offers multiple cutting height adjustments, ranging from 1.5 to 4 inches, allowing users to customize their mowing to suit different grass types and personal preferences.

The Poulan PP16H36RB is designed for comfort and control, featuring an ergonomic, fully adjustable seat that supports the user during long mowing sessions. The mower is equipped with a smooth hydrostatic transmission that allows for seamless speed control. This feature enhances maneuverability around obstacles such as trees and flowerbeds, ensuring that users can maintain their lawns without missing a spot.

Safety is also a priority in the design of the PP16H36RB. The mower includes essential safety features such as automatic blade disengagement, which stops the blades when the user leaves the seat, preventing accidents. The sturdy frame and reliable construction ensure that users can navigate rough terrain without compromising stability or safety.

In conclusion, the Poulan PP16H36RB, with its powerful engine, wide cutting deck, and user-friendly features, stands out as a dependable choice for anyone looking to maintain their yard effortlessly. It combines comfort, efficiency, and safety, making it an excellent investment for achieving a beautifully manicured lawn. With the Poulan PP16H36RB, lawn care becomes less of a chore and more of a pleasure.