IDENTIFICATION OF SYMBOLS
WARNING! This chain saw can be dangerous! Careless or improper use can cause serious or even fatal injury.
Always wear appropriate ear protection, eye protec- tion and head protection.
| Read and understand the |
| instruction manual before |
| using the chain saw. |
XX_ | Measured maximum kick- |
| back value without chain |
| brake for the bar and chain |
| combination on the label. |
Always use two hands when operating the chain saw.
WARNING! Contacting the guide bar tip with any ob- ject should be avoided; tip contact may cause the guide bar to move suddenly upward and backward, which may cause serious injury.
Starting Reminder
Move ON/STOP switch to the ON position.
Slowly press primer bulb 6 times.
Pull choke/fast idle lever out to the full extent (to the FULL CHOKE posi- tion).
Pull the starter rope sharply 5 times with your right hand.
Push the choke/fast idle lever in to the HALF CHOKE position.
Pull the starter rope sharply with your right hand until the engine starts.
Chain Tensioning
Lift lever on bar knob and turn counterclockwise 1 turn to loosen bar clamp.
Turn adjusting wheel (downward direction) to tension chain until chain solidly contacts bottom of guide bar rail.
While lifting tip of guide bar, tight- en bar knob (clockwise) securely. Hand tighten only! Return lever on bar knob to original position.
2
