MAINTENANCE

V-BELTS

Check V-belts for deterioration and wear after every 50 hours of operation and replace if necessary. The belts are not adjustable. Replace belts if they begin to slip from wear. (See “TO REMOVE BELT COVER” in the Service and Adjustments section of this manual).

TheV-belts on your snow thrower are of special construction and should be replaced by original equipment manufacturer (OEM) belts available from your nearest dealer.Using other than OEM belts can cause personal injury or damage to the snow thrower.

AUGER GEAR CASE

The gear case was fi lled with lubricant to the proper level at the factory. The only time the lubricant needs attention is if service has been performed on the gear case.

If lubricant is required, use only Ronex ED #1 grease.

TRACTION DRIVE SYSTEM

DO NOT lubricate the drive components inside the snow thrower. The sprockets, hex shafts, drive disc and friction wheel require no lubrication. The bearings and bushings are lifetime lubricated and require no maintenance.

CAUTION: Any lubricating of the above compo- nents can cause contamination of the friction wheel and damage to the drive system of your snow thrower.

ENGINE

See engine manual.

LUBRICATION

Use only high quality detergent oil rated with API service classification SF-SJ. Select the oil's SAE viscosity grade according to your expected operating temperature.

NOTE: Although multi-viscosity oils (5W30, 10W30 etc.) improve starting in cold weather, these multi-viscosity oils will result in increased oil consumption when used above 32°F. Check your engine oil level more frequently to avoid possible engine damage from running low on oil.

Change the oil after every 50 hours of operation or at least once a year if the snow thrower is not used for 50 hours in one year.

Check the crankcase oil level before starting the engine and after each fi ve (5) hours of continuous use. Tighten oil fi ll cap / dipstick securely each time you check the oil level.

TO CHANGE ENGINE OIL

Determine temperature range anticipated before next oil change. All oil must meet API service classifi cation SF-SJ.

Be sure snow thrower is on level surface.

Oil will drain more freely when warm.

Catch oil in a suitable container.

NOTE: The left side wheel may be removed from snow thrower for easier access to the oil drain plug and place- ment of a suitable container. The unit tilted, resting on the frame with the left wheel removed, will help drain any oil trapped inside the engine. (See “TO REMOVE WHEELS” in the Service and Adjustments section of this manual).

1.Disconnect spark plug wire from spark plug and place wire where it cannot come in contact with spark plug.

2.Clean area around drain plug.

3.Remove drain plug and drain oil in a suitable container.

4.Install drain plug and tighten securely.

5.Wipe off any spilled oil from snow thrower and engine.

6.Install left wheel (if removed for draining oil). Be sure to install klick pin into proper hole in wheel axle (See “TO REMOVE WHEELS” in the Service and Adjustments section of this manual).

7.Remove oil fi ll cap/dipstick. Be careful not to allow dirt to enter the engine.

8.Refill engine with oil through oil dipstick tube. Pour slowly. Do not overfill. For approximate capacity see “PRODUCT SPECIFICATIONS”section of this manual.

9.Use gauge on oil fi ll cap/dipstick for checking level. Be sure dipstick cap is tightened securely for accurate reading. Keep oil at “FULL” line on dipstick.

10.Wipe off any spilled oil.

MUFFLER

Inspect and replace corroded muffler as it could create a fire hazard and/or damage.

SPARK PLUG

Replace spark plug at the beginning of each season or after every 100 hours of operation, whichever occurs fi rst. Spark plug type and gap setting are shown in the “PRODUCT SPECIFICATIONS” section of this manual.

CLEANING

IMPORTANT: For best performance, keep snow thrower housing free of any dirt or trash. Clean the outside of your snow thrower after each use.

WARNING: Disconnect spark plug wire from spark plug and place wire where it cannot come in contact with spark plug.

Keep finished surfaces/wheels free of gasoline, oil, etc.

We do not recommend using a garden hose to clean your snow thrower unless the electrical system, muffler and carburetor are covered to keep water out. Water in engine can result in shortened engine life.

15

Page 15
Image 15
Poulan PP5524ESA owner manual Engine, Cleaning

PP5524ESA specifications

The Poulan PP5524ESA is a powerful and robust snow blower designed to tackle winter challenges with ease. This reliable machine is engineered for homeowners who need efficient snow clearing solutions for driveways, sidewalks, and patios. It combines user-friendly features with advanced technology to deliver outstanding performance and convenience.

One of the standout features of the PP5524ESA is its 24-inch clearing width, allowing it to handle large areas of snow quickly. The 5.5 horsepower engine delivers superior power, enabling the machine to cut through heavy and compacted snow with efficiency. Coupled with an auger and impeller system, the snow blower effectively collects and discharges snow up to 35 feet away, making it an ideal choice for heavy snow conditions.

The PP5524ESA is built with an electric start option, allowing users to start the machine easily with the push of a button, even in frigid temperatures where traditional pull starts can be a struggle. Additionally, the snow blower features six forward speeds and two reverse speeds, providing versatility and control over various snow types and conditions. This flexibility allows users to adjust their speed according to the terrain and snow depth, ensuring optimal performance.

The ergonomic design of the PP5524ESA contributes to user comfort. It is equipped with anti-vibration handles that reduce fatigue during extended use, making it easier to maneuver around obstacles. Furthermore, the adjustable chute control allows users to direct the snow discharge with precision, preventing unwanted snow accumulation on walkways and driveways.

Durability is a key characteristic of the Poulan PP5524ESA. The sturdy construction and high-quality materials ensure that it can withstand harsh winter weather and rigorous use year after year. The machine also features heavy-duty tires that provide excellent traction, helping it navigate through snow and uneven surfaces without getting stuck.

In summary, the Poulan PP5524ESA is a reliable and efficient snow blower equipped with a powerful engine, user-friendly features, and durable design. With its significant clearing width, adjustable speed settings, and advanced snow management technology, this snow blower is an essential tool for anyone dealing with heavy snowfall. Whether you're looking to keep your driveway clear or maintain a safe pathway, the PP5524ESA stands out as a practical and effective solution for winter snow removal.