SERVICE AND ADJUSTMENTS

WARNING: To avoid serious injury, before performing any service or ad- justments:

1.Be sure throttle is in STOP position.

2.Remove safety ignition key.

3.Make sure the augers and all moving parts have completely stopped.

4.Disconnect spark plug wire from spark plug and place wire where it cannot come in contact with plug.

SNOW THROWER

TO ADJUST SNOW THROWER HEIGHT

See “TO ADJUST SKID PLATES” and “SCRAPER BAR” in the Operation section of this manual.

CHUTE DEFLECTOR

The chute defl ector, attached to the top of the discharge chute, is provided to direct discharging snow away from the operator. If the defl ector becomes damaged, it should be replaced.

WARNING: To avoid serious injury, never operate your snow thrower with the deflector removed or damaged.

To change direction and/or distance snow is discharged, see “TO CONTROL SNOW DISCHARGE” in the Op- eration section of this manual.

SHEAR BOLTS (See Fig. 19)

AUGER SHEAR BOLTS

Both right and left-hand augers are secured to the auger shaft with a shoulder/shear bolt and hex nut. Should a for- eign object or ice become lodged in the augers, the shear bolts are designed to break, preventing damage to any other components. If one or both augers do not turn when auger control lever is engaged, check to see if one or both of the bolts have sheared. To replace the shear bolts:

1.Disengage all controls and move throttle control to STOP position. Wait for all moving parts to stop.

2.Disconnect spark plug wire from spark plug and place it wear it cannot come in contact with spark plug.

3.Align hole in auger hub with hole in auger shaft and install a new 1/4-20 x 2" shoulder/shear bolt. Install 1/4-20 lock nut and tighten securely.

CAUTION: Do not substitute. Use only original equipment shear bolts as supplied with your snow thrower.

4.Connect spark plug wire to spark plug.

IMPELLER SHEAR BOLTS

 

The impeller is secured to the impeller shaft with two (2)

 

capscrew/shear bolts and hex nuts. Should a foreign object

 

or ice become lodged in the impeller, the capscrews are

 

designed to break, preventing damage to any other com-

 

ponents. If impeller does not turn when auger control lever

 

is engaged, check to see if the capscrews have sheared.

 

To replace the capscrew/shear bolts:

16

1.Disengage all controls and move throttle control to STOP position. Wait for all moving parts to stop.

2.Disconnect spark plug wire from spark plug and place it wear it cannot come in contact with spark plug.

3.Align holes in impeller hub with holes in impeller shaft and install two (2) new 1/4-20 x 1-5/8" capscrew/shear bolts. Install 1/4-20 locknuts and tighten securely.

CAUTION: Do not substitute. Use only original equipment capscrew/shear bolts as supplied with your snow thrower.

4.Connect spark plug wire to spark plug.

1/4-20

1/4-20 x 1-5/8

1/4-20 x 2

LOCKNUT

CAPSCREW /

SHOULDER /

 

SHEAR BOLT

SHEAR BOLT

 

IMPELLER HUB

 

 

IMPELLER

 

 

SHAFT

 

 

 

AUGER

 

 

HUB

1/4-20

AUGER

AUGER

LOCKNUT

HUB

SHAFT

FIG. 19

TO REMOVE BELT COVER (See Fig. 20)

1.Remove the two (2) screws securing belt cover to frame.

2.Remove belt cover.

Replace belt cover by installing cover and screws and tighten securely.

 

BELT

 

COVER

FRAME

SCREWS

FIG. 20

Page 16
Image 16
Poulan PP5524ESA owner manual Service and Adjustments, To Adjust Snow Thrower Height, Chute Deflector, Shear Bolts See Fig

PP5524ESA specifications

The Poulan PP5524ESA is a powerful and robust snow blower designed to tackle winter challenges with ease. This reliable machine is engineered for homeowners who need efficient snow clearing solutions for driveways, sidewalks, and patios. It combines user-friendly features with advanced technology to deliver outstanding performance and convenience.

One of the standout features of the PP5524ESA is its 24-inch clearing width, allowing it to handle large areas of snow quickly. The 5.5 horsepower engine delivers superior power, enabling the machine to cut through heavy and compacted snow with efficiency. Coupled with an auger and impeller system, the snow blower effectively collects and discharges snow up to 35 feet away, making it an ideal choice for heavy snow conditions.

The PP5524ESA is built with an electric start option, allowing users to start the machine easily with the push of a button, even in frigid temperatures where traditional pull starts can be a struggle. Additionally, the snow blower features six forward speeds and two reverse speeds, providing versatility and control over various snow types and conditions. This flexibility allows users to adjust their speed according to the terrain and snow depth, ensuring optimal performance.

The ergonomic design of the PP5524ESA contributes to user comfort. It is equipped with anti-vibration handles that reduce fatigue during extended use, making it easier to maneuver around obstacles. Furthermore, the adjustable chute control allows users to direct the snow discharge with precision, preventing unwanted snow accumulation on walkways and driveways.

Durability is a key characteristic of the Poulan PP5524ESA. The sturdy construction and high-quality materials ensure that it can withstand harsh winter weather and rigorous use year after year. The machine also features heavy-duty tires that provide excellent traction, helping it navigate through snow and uneven surfaces without getting stuck.

In summary, the Poulan PP5524ESA is a reliable and efficient snow blower equipped with a powerful engine, user-friendly features, and durable design. With its significant clearing width, adjustable speed settings, and advanced snow management technology, this snow blower is an essential tool for anyone dealing with heavy snowfall. Whether you're looking to keep your driveway clear or maintain a safe pathway, the PP5524ESA stands out as a practical and effective solution for winter snow removal.