•Do not put hands or feet near or under rotating parts. Keep clear of the discharge opening and front auger area at all times.

•Exercise extreme caution when operating on or cross- ing gravel drives, walks or roads. Stay alert for hidden hazards or traffic.

•After striking a foreign object, stop the engine (motor), remove wire from the spark plug, thoroughly inspect snow thrower for any damage, and repair the damage before restarting and operating the snow thrower.

•If the unit should start to vibrate abnormally, stop the engine (motor) and check immediately for the cause. Vibration is generally a warning of trouble.

•Stop the engine (motor) whenever you leave the oper- ating position, before unclogging the auger/impeller housing or discharge chute and when making any repairs, adjustments, or inspections.

•When cleaning, repairing, or inspecting, make certain all controls are disengaged and the auger/impeller and all moving parts have stopped. Disconnect the spark plug wire and keep the wire away from the spark plug to prevent accidental starting.

•Take all possible precautions when leaving the snow thrower unattended.Disengage the auger/impeller, stop engine (motor), and remove key.

•Do not run the engine (motor) indoors, except when starting the engine (motor) and for transporting the snow thrower in or out of the building. Open the outside doors.

WARNING: Exhaust fumes are dan- gerous (containing CARBON MONOX- IDE, an ODORLESS and DEADLY GAS).

•Do not clear snow across the face of slopes. Exercise extreme caution when changing direction on slopes. Do not attempt to clear steep slopes.

•Never operate the snow thrower without proper guards, plates or other safety protective devices in place.

•Never operate the snow thrower near glass enclo- sures, automobiles, window wells, drop–offs, and the like without proper adjustment of the snow discharge angle. Keep children and pets away.

•Do not overload the machine capacity by attempting to clear snow at too fast a rate.

•Never operate the machine at high transport speeds on slippery surfaces. Look behind and use care when backing up.

•Never direct discharge at bystanders or allow anyone in front of the unit.

•Disengage power to the auger/impeller when snow thrower is transported or not in use.

•Use only attachments and accessories approved by the manufacturer of the snow thrower (such as wheel weights, counterweights, cabs, tire chains, electric start kits, etc.).

•Never operate the snow thrower without good visibility or light. Always be sure of your footing and keep a fi rm hold on the handles. Walk; never run.

•Do not overreach. Keep proper footing and balance at all times.

•This snow thrower is for use on sidewalks, driveways and other ground level surfaces.

•Do not use the snow thrower on surfaces above ground level such as roofs of residences, garages, porches or other such structures or buildings.

MAINTENANCE AND STORAGE

•Check shear bolts and other bolts at frequent intervals for proper tightness to be sure the equipment is in safe working condition.

•Never store the snow thrower with fuel in the tank inside a building where ignition sources are present such as hot water and space heaters, clothes dryers, and the like. Allow the engine (motor) to cool before storing in any enclosure.

•Always refer to operator’s guide instructions for im- portant details if the snow thrower is to be stored for an extended period.

•Maintain or replace safety and instruction labels, as necessary.

•Run the snow thrower, with auger engaged, a few minutes after throwing snow to clear the machine and prevent freeze-up of the auger/impeller.

CONGRATULATIONS on your purchase of a new snow thrower. It has been designed, engineered and manufactured to give best possible dependability and performance.

Should you experience any problem you cannot easily remedy, please contact your nearest authorized service center/department. We have competent, well-trained tech- nicians and the proper tools to service or repair this unit.

Please read and retain this manual. The instructions will enable you to assemble and maintain your snow thrower properly. Always observe the “SAFETY RULES”.

SERIAL NUMBER: ___________________________

DATE OF PURCHASE: _______________________

THE MODEL AND SERIAL NUMBERSWILL BE FOUND ON A DECAL ATTACHEDTOTHE REAR OFTHE SNOW THROWER HOUSING.

YOU SHOULD RECORD BOTH SERIAL NUMBER AND DATE OF PURCHASE AND KEEP IN A SAFE PLACE

FOR FUTURE REFERENCE.

3

PRODUCT SPECIFICATIONS

Gasoline Capacity

3.5 Quarts

and Type:

Unleaded Regular only

 

 

Oil Type

SAE 30 (above 40°F)

(API-SF-SJ):

SAE 5W-30 or 10W-30 (0° to +40°F)

 

SAE 0W-30 (below 0°F)

 

 

Oil Capacity:

21 Ounces

 

 

Spark Plug:

Champion RN4C (Gap: .030")

 

 

CUSTOMER RESPONSIBILITIES

•Read and observe the safety rules.

•Follow a regular schedule in maintaining, caring for and using your snow thrower.

•Follow the instructions under “Maintenance” and “Stor- age” sections of this owner’s manual.

Page 2 Page 4
Page 3
Image 3
Poulan PP5524ESA owner manual Maintenance and Storage, Api-Sf-Sj
Page 2 Page 4

PP5524ESA specifications

The Poulan PP5524ESA is a powerful and robust snow blower designed to tackle winter challenges with ease. This reliable machine is engineered for homeowners who need efficient snow clearing solutions for driveways, sidewalks, and patios. It combines user-friendly features with advanced technology to deliver outstanding performance and convenience.

One of the standout features of the PP5524ESA is its 24-inch clearing width, allowing it to handle large areas of snow quickly. The 5.5 horsepower engine delivers superior power, enabling the machine to cut through heavy and compacted snow with efficiency. Coupled with an auger and impeller system, the snow blower effectively collects and discharges snow up to 35 feet away, making it an ideal choice for heavy snow conditions.

The PP5524ESA is built with an electric start option, allowing users to start the machine easily with the push of a button, even in frigid temperatures where traditional pull starts can be a struggle. Additionally, the snow blower features six forward speeds and two reverse speeds, providing versatility and control over various snow types and conditions. This flexibility allows users to adjust their speed according to the terrain and snow depth, ensuring optimal performance.

The ergonomic design of the PP5524ESA contributes to user comfort. It is equipped with anti-vibration handles that reduce fatigue during extended use, making it easier to maneuver around obstacles. Furthermore, the adjustable chute control allows users to direct the snow discharge with precision, preventing unwanted snow accumulation on walkways and driveways.

Durability is a key characteristic of the Poulan PP5524ESA. The sturdy construction and high-quality materials ensure that it can withstand harsh winter weather and rigorous use year after year. The machine also features heavy-duty tires that provide excellent traction, helping it navigate through snow and uneven surfaces without getting stuck.

In summary, the Poulan PP5524ESA is a reliable and efficient snow blower equipped with a powerful engine, user-friendly features, and durable design. With its significant clearing width, adjustable speed settings, and advanced snow management technology, this snow blower is an essential tool for anyone dealing with heavy snowfall. Whether you're looking to keep your driveway clear or maintain a safe pathway, the PP5524ESA stands out as a practical and effective solution for winter snow removal.
Top Page Image Contents