SERVICE AND ADJUSTMENTS

TO LEVEL MOWER

Make sure tires are properly inflated to the PSI shown on tires. If tires are over or under inflated, it may affect the appearance of your lawn and lead you to think the mower is not adjusted properly.

VISUAL SIDE-TO-SIDE ADJUSTMENT (See Fig. 34)

•With all tires properly inflated and if your lawn appears unevenly cut, determine which side of mower is cutting lower.

NOTE: As desired, you can raise the low side of mower or lower the high side.

•Go to side of mower you wish to adjust.

•With a 3/4" or adjustable wrench, turn lift link adjust- ment nut (A) to the left to lower the mower, or, to the right to raise the mower.

 

A

Turn nut right

Turn nut left

to raise mower

to lower mower

Fig. 34

NOTE: Each full turn of adjustment nut will change mower height about 3/16".

•Test your adjustment by mowing some uncut grass and visually checking the appearance. Readjust, if necessary, until you are satisfied with the results.

PRECISION SIDE-TO-SIDE ADJUSTMENT (See Fig. 35)

•With all tires properly inflated, park tractor on level ground or driveway.

CAUTION: Blades are sharp. Protect your hands with gloves and/or wrap blade with heavy cloth.

•Raise mower to its highest position.

•At both sides of mower, position blade at side and measure the distance (A) from bottom edge of blade to the ground. The distance should be the same on both sides.

 

02966

A

A

Fig. 35

•If adjustment is necessary, see steps in Visual Adjust- ment instructions above.

•Recheck measurements, adjust if necessary until both sides are equal.

FRONT-TO-BACK ADJUSTMENT (See Figs. 36 & 37) IMPORTANT: Deck must be level side-to-side.

To obtain the best cutting results, the mower blades should be adjusted so the front tip is 1/8" to 1/2" lower than the rear tip when the mower is in its highest position.

CAUTION: Blades are sharp. Protect your hands with gloves and/or wrap blade with heavy cloth.

•Raise mower to highest position.

•Position any blade so the tip is pointing straight forward. Measure distance (B) to the ground at front and rear tip of the blade.

BB

Fig. 36

•If front tip of blade is not 1/8" to 1/2" lower than the rear tip, go to the front of tractor.

•With an 11/16" or adjustable wrench, loosen jam nut A several turns to clear adjustment nut B.

•Witha3/4"oradjustablewrench,turnfrontlinkadjustment nut (B) clockwise (ltighten) to raise the front of mower, or, counterclockwise (loosen) to lower the front mower.

B

A

TIGHTEN ADJUST

LOOSEN

ADJUST NUT

NUT B TO RAISE

B TO LOWER

MOWER

 

02950

MOWER

 

LOOSEN JAM NUT A FIRST

 

Fig. 37

NOTE: Each full turn of the adjustment nut will change mower height about 1/8".

•Recheck measurements, adjust if necessary until front tip of blade is 1/8" to 1/2" lower than the rear tip.

•Hold adjustment nut in position with wrench and tighten jam nut securely against adjustment nut.

22

Page 21 Page 23
Page 22
Image 22
Poulan PPH25K54 manual To Level Mower, Visual SIDE-TO-SIDE Adjustment See Fig, Precision SIDE-TO-SIDE Adjustment See Fig
Page 21 Page 23

PPH25K54 specifications

The Poulan PPH25K54 is a standout model in the lawn care industry, designed specifically for homeowners who seek a reliable and powerful performing lawn mower. This machine is equipped with a potent 25 horsepower engine that delivers ample power for tackling thick grass and uneven terrain. Its robust design ensures durability, making it suitable for various lawn sizes and conditions.

A key feature of the Poulan PPH25K54 is its cutting width of 54 inches, allowing users to cover more ground in fewer passes. This is particularly beneficial for larger yards, reducing mowing time while maintaining a professional-looking lawn. The mower's cutting height is adjustable, offering a range of settings from 1.5 inches to 4 inches. This feature enables users to customize their mowing experience according to grass type and treatment preferences.

The PPH25K54 incorporates advanced technologies that enhance its performance and efficiency. The machine is equipped with a hydrostatic transmission system, allowing for smooth and seamless speed adjustments without the need for shifting gears. This feature not only improves ease of operation but also provides better control, especially on slopes and hilly terrain.

Safety is also a priority in the design of the Poulan PPH25K54. The mower is outfitted with a seat safety switch that prevents operation unless the operator is securely seated, significantly reducing the risk of accidents. Additionally, the durable steel frame adds stability during operation, ensuring users can maneuver the mower confidently.

Maintenance is simplified with the PPH25K54, featuring an easy-to-access oil filter and a spring-assisted deck lift for easier adjustments. This convenience allows homeowners to perform routine maintenance without extensive mechanical knowledge, promoting longevity and optimal performance.

In summary, the Poulan PPH25K54 combines power, efficiency, and user-friendly features that deliver an exceptional mowing experience. Its impressive engine, adjustable cutting height, and hydrostatic transmission make it an ideal choice for those looking to maintain their lawns with ease and precision. With its focus on safety and maintenance ease, this model is designed to meet the demands of any homeowner seeking a reliable and efficient lawn care solution.
Top Page Image Contents