CUSTOMER RESPONSIBILITIES

TRACTOR

Always observe safety rules when performing any mainte- nance.

BRAKE OPERATION

If tractor requires more than six (6) feet stopping distance at high speed in highest gear, then brake must be adjusted. (See “TO ADJUST BRAKE” in the Service and Adjustments section of this manual).

TIRES

Maintain proper air pressure in all tires (See “PRODUCT SPECIFICATIONS” section of this manual).

Keep tires free of gasoline, oil, or insect control chemi- cals which can harm rubber.

Avoid stumps, stones, deep ruts, sharp objects and other hazards that may cause tire damage.

NOTE: To seal tire punctures and prevent flat tires due to slow leaks, tire sealant may be purchased from your local parts dealer. Tire sealant also prevents tire dry rot and corrosion.

OPERATOR PRESENCE SYSTEM

Be sure operator presence and interlock systems are work- ing properly. If your tractor does not function as described, repair the problem immediately.

The engine should not start unless the clutch/brake pedal is fully depressed and attachement clutch control is in the disengaged position.

When the engine is running, any attempt by the operator to leave the seat without first setting the parking brake should shut off the engine.

When the engine is running and the attachment clutch is engaged, any attempt by the operator to leave the seat should shut off the engine.

The attachment clutch should never operate unless the operator is in the seat.

BLADE CARE

For best results mower blades must be kept sharp. Replace bent or damaged blades.

BLADE REMOVAL (See Fig. 12)

Raise mower to highest position to allow access to blades.

Remove hex bolt, lock washer and flat washer securing blade.

Install new or resharpened blade with trailing edge up towards deck as shown.

IMPORTANT: TO ENSURE PROPER ASSEMBLY, CENTER HOLE IN BLADE MUST ALIGN WITH STAR ON MANDREL ASSEMBLY.

Reassemble hex bolt, lock washer and flat washer in exact order as shown.

Tighten bolt securely (27-35 Ft. Lbs. torque).

IMPORTANT: BLADE BOLT IS GRADE 8 HEAT TREATED.

TRAILING

MANDREL

ASSEMBLY

EDGE UP

 

BLADE

 

 

CENTER

 

HOLE

LOCK WASHER

STAR

FLAT WASHER

HEX BOLT (GRADE 8)*

*A GRADE 8 HEAT TREATED BOLT CAN BE

IDENTIFIED BY SIX LINES ON THE BOLT HEAD.

FIG. 12

TO SHARPEN BLADE (See Fig. 13)

NOTE: We do not recommend sharpening blade - but if you do, be sure the blade is balanced.

Care should be taken to keep the blade balanced. An unbalanced blade will cause excessive vibration and even- tual damage to mower and engine.

The blade can be sharpened with a file or on a grinding wheel. Do not attempt to sharpen while on the mower.

To check blade balance, you will need a 5/8" diameter steel bolt, pin, or a cone balancer. (When using a cone balancer, follow the instructions supplied with balancer).

NOTE: Do not use a nail for balancing blade. The lobes of the center hole may appear to be centered, but are not.

Slide blade on to an unthreaded portion of the steel bolt or pin and hold the bolt or pin parallel with the ground. If blade is balanced, it should remain in a horizontal position. If either end of the blade moves downward, sharpen the heavy end until the blade is balanced.

CENTER HOLE

5/8" BOLT

BLADE

OR PIN

 

FIG. 13

16

Page 16
Image 16
Poulan PPR17H42STC, 173284 owner manual Tractor, Brake Operation, Tires, Operator Presence System, Blade Care

173284, PPR17H42STC specifications

The Poulan Pro PPR17H42STC is a versatile lawn tractor that is designed to deliver exceptional performance in maintaining your lawn and garden. This powerful machine offers a combination of advanced features, robust technology, and user-friendly characteristics, making it an ideal choice for both homeowners and landscape professionals.

One of the standout features of the Poulan Pro PPR17H42STC is its robust 17.5-horsepower Briggs & Stratton engine. This reliable engine provides ample power to tackle a variety of mowing tasks efficiently, ensuring that even thick grass and uneven terrain are no match for its performance. Coupled with a hydrostatic transmission, this lawn tractor offers smooth acceleration and easy maneuverability, allowing the operator to navigate tight corners and challenging landscapes with ease.

The PPR17H42STC also boasts a 42-inch reinforced cutting deck, which is designed for durability and strength while delivering a professional-quality cut. The deck features a side-discharge capability, enabling the user to disperse clippings evenly across the lawn, promoting healthy grass growth. Additionally, the cutting height can be easily adjusted to suit varying lawn conditions, making it adaptable to changing seasons and grass types.

Another notable characteristic of this model is its ergonomic design, which includes a comfortable seat and user-friendly control layout. The high back seat provides support during longer mowing sessions, while the pedal-operated controls are intuitive, ensuring that users can focus on mowing without struggling with complicated mechanisms.

In terms of technology, the PPR17H42STC is equipped with a range of innovations aimed at enhancing the mowing experience. The integrated headlights provide improved visibility during early morning or late evening mowing sessions, while the easy-to-use ignition switch allows for quick and hassle-free starting.

Furthermore, this lawn tractor features a built-in mulching capability, allowing users to recycle grass clippings back into the lawn. This not only reduces yard waste but also provides essential nutrients to the soil, fostering a healthier lawn.

In summary, the Poulan Pro PPR17H42STC is a powerful, efficient, and user-friendly lawn tractor that combines advanced technology with practical features. Whether you are maintaining a small garden or a large lawn, this machine is designed to meet your needs effectively.