OPERATION

TO ADJUST GAUGE WHEELS (See Fig. 7)

Gauge wheels are properly adjusted when they are slightly off the ground when mower is at the desired cutting height in operating position. Gauge wheels then keep the deck in proper position to help prevent scalping in most terrain conditions.

NOTE:Adjust gauge wheels with tractor on a flat level surface.

Adjust mower to desired cutting height (See “TO AD- JUST MOWER CUTTING HEIGHT” in the Operation section of this manual).

With mower in desired height of cut position, gauge wheels should be assembled so they are slightly off the ground. Install gauge wheel in appropriate hole with shoulder bolt, 3/8 washer, and 3/8-16 locknut and tighten securely.

Repeat for opposite side installing gauge wheel in same adjustment hole.

3/8-16

LOCKNUT

GUAGE WHEEL

MOUNTING

BRACKET

3/8 WASHER

SHOULDER

GAUGE WHEEL

BOLT

 

FIG. 7

TO OPERATE MOWER (See Fig. 8)

Your tractor is equipped with an operator presence sensing switch. Any attempt by the operator to leave the seat with the engine running and the attachment clutch engaged will shut off the engine.

Select desired height of cut.

Start mower blades by engaging attachment clutch control.

TO STOP MOWER BLADES - disengage attachment clutch control.

CAUTION: Do not operate the mower without either the entire grass catcher, on mowers so equipped, or the deflector shield in place.

"ENGAGED" POSITION

ATTACHMENT LIFT LEVER HIGH POSITION

ATTACHMENT

 

CLUTCH LEVER

LOW

"DISENGAGED"

POSITION

POSITION

 

DEFLECTOR

SHIELD

FIG. 8

TO OPERATE ON HILLS

CAUTION: Do not drive up or down hills with slopes greater than 15° and do not drive across any slope.

Choose the slowest speed before starting up or down hills.

Avoid stopping or changing speed on hills.

If slowing is necessary, move throttle control lever to slower position.

If stopping is absolutely necessary, push clutch/brake pedal quickly to brake position and engage parking brake.

Move motion control lever to neutral (N) position.

IMPORTANT: THE MOTION CONTROL LEVER DOES NOT RETURN TO NEUTRAL (N) POSITION WHEN THE CLUTCH/BRAKE PEDAL IS DEPRESSED.

To restart movement, slowly release parking brake and clutch/brake pedal.

Slowly move motion control lever to slowest setting.

Make all turns slowly.

TO TRANSPORT (See Figs. 5 and 9)

When pushing or towing your tractor, be sure to disengage transmission by placing freewheel control in freewheeling position. Free wheel control is located at the rear drawbar of tractor.

Raise attachment lift to highest position with attach- ment lift control.

Pull freewheel control out and down into the slot and release so it is held in the disengaged position.

Do not push or tow tractor at more than two (2) MPH.

To reengage transmission, reverse above procedure.

NOTE: To protect hood from damage when transporting your tractor on a truck or a trailer, be sure hood is closed and secured to tractor. Use an appropriate means of tying hood to tractor (rope, cord, etc.).

12

Page 12
Image 12
Poulan PPR20H42STC To Adjust Gauge Wheels See Fig, To Operate Mower See Fig, To Operate on Hills, To Transport See Figs

PPR20H42STC specifications

The Poulan PPR20H42STC is a versatile and powerful garden tool designed for homeowners seeking an efficient solution for maintaining their lawns and gardens. This riding lawn mower stands out for its balance of performance, durability, and user-friendly features, making it an excellent choice for various mowing tasks.

One of the primary features of the PPR20H42STC is its robust 20-horsepower engine. This powerful engine ensures that you can tackle even the toughest grass and terrain without compromising on performance. The mower's engine is designed for longevity and reliability, providing the strength needed to handle extensive mowing jobs with ease.

The PPR20H42STC comes equipped with a 42-inch cutting deck. This mid-sized deck offers a perfect compromise between maneuverability and coverage, allowing users to navigate through tighter spaces while still covering larger areas efficiently. The cutting deck features adjustable heights, enabling homeowners to choose the ideal grass length for their lawns, ensuring a well-manicured appearance.

In terms of technology, the Poulan PPR20H42STC incorporates a hydrostatic transmission system. This transmission delivers smooth acceleration and deceleration, eliminating the need for shifting gears. As a result, users can experience a more relaxed mowing experience, focusing entirely on the task at hand without the distractions of a complicated gear system.

Another notable characteristic of this riding mower is its comfort-focused design. The PPR20H42STC features an ergonomic seat with plenty of cushioning, providing comfort during extended mowing sessions. The steering wheel's design allows for easy maneuverability, further enhancing the user experience.

The mower's rugged construction includes a durable frame and high-quality materials, ensuring it can withstand the rigors of outdoor use. Additionally, maintenance is simplified with easily accessible components, enabling homeowners to perform regular upkeep with minimal effort.

Safety is also a priority within the PPR20H42STC design. The mower is fitted with features such as an operator presence system that prevents accidental starts when the operator is not seated, enhancing overall user safety.

In conclusion, the Poulan PPR20H42STC is an impressive riding lawn mower that combines power, comfort, and safety features to create a reliable tool for lawn maintenance. With its strong engine, versatile cutting deck, and thoughtful design, it's an excellent investment for homeowners aiming for a pristine lawn.