MAINTENANCE
MAINTENANCE
SCHEDULE
FILL IN DATES
AS YOU COMPLETE
REGULAR SERVICE
Check Engine Oil Level
Change Engine Oil
Oil Pivot Points
Inspect Spark Arrester / Muffler
Inspect Air Screen
Clean or Replace Air Cleaner Cartridge
Clean Engine Cylinder Fins
Replace Spark Plug
RH Gear Case Grease Fitting (1oz.)
| EACH | USE | HOURS 25 | HOURS |
|
| HOURS SEASON |
| |
BEFORE |
| 5 | 5 | 0 |
| ||||
EVERY |
| EVERY | EVERY |
|
| EVERY | SERVICE DATES | ||
|
|
|
|
|
|
|
|
| |
1,2
2
1 - Change more often when operating under a heavy load or in high ambient temperatures. 2 - Service more often when operating in dirty or dusty conditions.
GENERAL RECOMMENDATIONS
The warranty on this tiller does not cover items that have been subjected to operator abuse or negligence. To receive full value from the warranty, the operator must maintain tiller as instructed in this manual.
Some adjustments will need to be made periodically to properly maintain your tiller.
All adjustments in the Service and Adjustments section of this manual should be checked at least once each season.
•Once a year you should replace the spark plug, clean or replace air filter, and check tines and belts for wear. A new spark plug and clean air filter assure proper
BEFORE EACH USE
•Check engine oil level.
•Check tine operation.
•Check for loose fasteners.
LUBRICATION
Keep unit well lubricated (See “LUBRICATION CHART”).
LUBRICATION CHART
| c THROTTLE CONTROL |
d ENGINE | eRH GEAR CASE |
| GREASE FITTING |
| c DEPTH |
| STAKE PIN |
| c LEVELING |
| SHIELD |
| HINGES |
c IDLER | c WHEEL |
BRACKET | |
| HUB |
cSAE 30 OR
dREFER TO MAINTENANCE “ENGINE” SECTION
eEP #1 GREASE
11
