[7]TV SHAPE:
Set TFT screen mode to the correct ratio:
Three screen ratio modes are available, Normal/PS (4:3 Pan Scan), Normal/LB (4:3 Letter Box) and Wide (16:9). Different disc formats will display different images depending this setting and the screen size used.
[8]NTSC/ PAL:
Select this menu item to set up your preferred video output format. PAL is commonly used in Europe. NTSC is commonly used in the USA and Japan. Auto is commonly used.
[9]DEFAULT:
Factory reset. Set all values to Factory default values including memory and preset stations.
SYSTEM INFORMATION
Press SYSTEM button to show the information of the system. You can view detail system information
including serial number of the software.
CALIBRATION
The calibration of the screen is useful when some malfunction occur with the touch screen and it needs adjustment.
CALIBRATION procedure of the touch screen is described as below: When the target moves to
another position, tap and hold at the center of the new
target. Repeat each time to complete the calibration process. When the calibration has been completed, the device switches back to the previous operating mode and retain the previous setting. If you press
Reset button, the setting will return to factory setting.
TV SECTION(ONLY FOR PD-930T/PD-930BT)
Connect a TV BOX to the TV antenna jack of the unit. Select TV mode, and then touch the center of the display; following interface will be display.
In TV mode, press the Play/Pause buttons on the RC once to enter TV menu setting; or press TV MENU icon on the main menu to enter TV menu.
1.Press the 
/
on remote or tap the screen to select one of the setup pages: Auto program => Manual program.
2.To enter the selected page press ENTER button on the RC. Press UP/DOWN cursor buttons on the RC
Select this menu item is to set the storage number or touch the needed item on the screen to select an item, and then press ENTER button on the RC or press the item on the screen to
20
