Power Acoustik PD-930T, PD-930BT owner manual Symptom Cause Solution

TROUBLESHOOTING

SYMPTOM	CAUSE		SOLUTION
			IF THE POWER SUPPLY IS PROPERLY
	THE CAR IGNITION IS		CONNECTED TO THE CAR
NO POWER	NOT ON.		ACCESSORY SWITCH THE IGNITION KEY
			TO “ACC”.
	THE FUSE IS BLOWN.		REPLACE THE FUSE.
DISC CANNOT BE	PRESENCE OF DISC		REMOVE THE DISC IN THE PLAYER
LOADED.	INSIDE THE PLAYER		THEN PUT A NEW UPWARD.
	INSERTING THE DISC IN		INSERT THE COMPACT DISC WITH THE
			LABEL FACING
	UPSIDE DOWN.
			UPWARD.
DISC CANNOT BE	COMPACT DISC IS		CLEAN THE DISC OR TRY TO PLAY A
	EXTREMELY DIRTY OR		NEW ONE.
READ.
	DEFECTIVE.
	TEMPERATURE INSIDE		COOL OFF UNTIL THE AMBIENT
			TEMPERATURE RETURNS TO
	THE CAR IS TOO HIGH.
			NORMAL.
	VOLUME IS IN MINIMUM.	ADJUST VOLUME TO A DESIRED LEVEL.
NO SOUND
	WIRING IS NOT		CHECK WIRING CONNECTION.
	PROPERLY CONNECTED.
	THE BUILT-IN
	MICROCOMPUTER IS NOT
THE OPERATION	OPERATING PROPERLY		PRESS THE POWER BUTTON FOR
	DUE TO NOISE.		ABOUT 10 SECONDS
KEYS DO NOT WORK.
	FRONT PANEL IS NOT		TO RESET THE UNIT.
	PROPERLY FIX INTO ITS
	PLACE.
	THE INSTALLATION		ADJUST THE INSTALLATION ANGLE TO
	ANGLE IS MORE THAN 30		LESS THAN 30
SOUND SKIPS.	DEGREES.		DEGREES.
	THE DISC IS EXTREMELY		CLEAN THE COMPACT DISC/TRY TO
	DIRTY OR DEFECTIVE.		PLAY A NEW ONE.
THE RADIO DOES
NOT WORK, THE	THE ANTENNA CABLE IS		INSERT THE ANTENNA CABLE FIRMLY
RADIO STATION
	NOT CONNECTED THE		SELECT A STATION
AUTOMATIC
	SIGNALS ARE TOO WEAK.		MANUALLY.
SELECTION DOES
NOT WORK.

28