Power Acoustik PTID-3600 Other functions, Anti-theft system, Video Setup, Digital setup

Video Setup:

Brightness

With this menu item you can set up the brightness of the image.

Contrast

With this menu item you can set up the contrast of the image.

Hue

With this menu item you can set up the hue.

Saturation

With this menu item you can set up the color saturation.

Sharpness

With this menu item you can set up the sharpness of the image.

Digital setup

Dynamic range

This function is to obtain different compression results of the audio signals, default is set to “OFF”.

If select FULL, the max audio signal is minimum.

Dual mono

With this menu item you can select the type of Left and Right channel audio output. Stereo is normal Stereo, Mono L is all sound on the Left Audio output, Mono R is all sound on the

Right channel. The “Mix Mono” function only works when a DVD is being played in DTS 5.1 mode.

Other functions

Subwoofer

Connect the subwoofer to the unit using sub output (see electrical diagram). Press MENU button, choose expert and set subwoofer ON to enable subwoofer.

Anti-theft system

Remove the panel

1.Press the PWR button to turn the power off.

2.Press OPEN button to detach the panel.

3.Pull the panel out.

4.Place the panel into the case and take it with you when you leave the car.

Remove the unit

1.Remove the panel and the trim plate.

2.Insert both T-Keys into hole on the front of the set until they lock.

3.Pull out the unit.

Page-22