Powercom 425AP, 525AP, 625AP, 325A user manual Storage, Specifications

11.Storage

__________________________________________________________

____

10.1 Storage conditions

Store the UPS covered and upright in a cool , dry location, with its battery fully charged. Before storing, charger the UPS for at least 4 hours. Remove any accessories in the accessory slot and disconnect any cables connected to the computer interface port to avoid unnecessary draining the battery.

10.2 Extended storage

During extended storage in environments where the ambient temperature is -15 to +30 (+5 to +86 ), charge the UPS‘s battery every 6 months.

During extended storage in environments where the ambient temperature is +30 to +45 (+86 to +113 ), charge the UPS‘s battery every 3 months.

12.Specifications

__________________________________________________________

____

MODEL		325A		425A(P)	525A(P)	625A(P)
INPUT	Capacity	325VA		425VA	525VA	625VA
	Voltage	100V, 110V, 120V, 220V, 232V, 240V, +/-25%
	Frequency			50 or 60Hz +/-5% (auto sensing)
OUTPUT	Voltage		Simulated sine wave at Line Input +/-5%
	(on battery)
	Frequency			50 or 60Hz +/-0.5%
	(on battery)
	Voltage	AVR automatically increase output voltage 15% above input
	Regulation	voltage if -9% to-25% of nominal. AVR decrease output voltage
	AVR	13% below input voltage if+9% to 25% of nominal
	Transfer Time		2/4 milliseconds, including detection time
PROTECTION	Spike Protection			320 joules, 2ms
and
FILTERING
	EMI/RFI filter			10dB at15MHz, 50dB at 30MHz
				(for xxxAP models only)
	Overload	UPS automatic shutdown if overload exceeds 110% of nominal at
	Protection			60 second and 130% at 3 seconds.
	Unit Input		Fuse for overload & short circuit protection
	10Baase-T			Network (UTP, RJ-45) compatible jacks
	Cable Port			(for xxxAp models only)
	Short Circuit	UPS output cut off immediately or input fuse protection
BATTERY	Type			Sealed, maintenance-free lead acid