4. Installation
4.0 Inspection
Inspect the UPS upon receipt. The packaging is recyclable; save it for reuse or dispose of it properly.
4.1 Placement
Install the UPS in a protected area with adequate air flow and free of excessive dust. Do not operate the UPS where the temperature and humidity is outside the specified limits.
4.2 Connect Computer Interface (optional)
UPSMON series software (or other power management software) and an interface kits can be used with this UPS. Use only kits supplied or approved by the manufacturer. If used, connect the interface cable to the 9 pin computer interface port on the back panel of the UPS.
Note: Computer interface connection is optional. The UPS works properly without a computer interface connection.
Caution: Use only factory supplied or authorized UPS monitoring cable !
4.3 Connect external battery pack (optional)
Before connecting, make sure the external battery pack and the connector cable are compatible with this UPS.
Note: External battery connection is not necessary. The UPS works properly without a external battery pack connection.
Caution: Use only factory supplied or external battery connection cable !
4.4 Connect the telephone/modem lines (optional)
Connect a single line telephone or a modem line into the telephone/modem surge protection sockets on the back of the UPS. The
6
