PD-3006/12
Power over LAN Solutions 5 Cat. No.: 06-6831-056
1 Safety Information 1.1 General Guidelines
You must read the following safety information before carrying out any
installation, removal or any maintenance procedure on the Power over LAN
Midspan. Warnings contain directions that must be followed for personal and
product safety. Follow all directions carefully.
WARNING
Read the Installation Instructions in Section 3 before connecting the Power
over LAN Midspan to its power source.
WARNING
The Midspan must use a grounded power cord, as defined in paragraph 1.2.
WARNING
This product relies on the building installation for short-circuit (overcurrent)
protection. Ensure that a fuse or circuit breaker no larger than 15 A for 120
VAC, (U.S.) 10 A for 230 VAC (international) is used.
WARNING
Do not work on the system, connect or disconnect cables during periods of
lightning activity.
WARNING
A voltage mismatch can cause equipment damage and may pose a fire
hazard. If the voltage indicated on the label is different from the power outlet
voltage, do not connect the Power over LAN Midspan to this outlet.
WARNING
For shelf-mounted equipment, be certain that the surface is stable and strong
enough to support the equipment. Do not stack more than four the Power over
LAN Midspans.
WARNING
Ultimate disposal of this product should be handled according to all local laws
and regulations.
WARNING
The Power over LAN Midspan "Data" and "Data + Power" ports are shielded
RJ-45 data sockets. They cannot be used as Plain Old Telephone Service
(POTS) telephone sockets. Only RJ-45 data connectors may be connected to
these sockets.
~
~
~
~
~
~
~
~