SPECIFICATIONS: 3520A Lathe
Table with standard extensions | 28” x 38” |
Distance Between Centers | |
Swing Over Bed | 20" |
Overall Length | 50" |
Spindle Speeds | |
Motor | 2HP, 220V |
Lathe Power Requirements | 220V, 3PH or 1PH |
Spindle Thread Size | |
Head/Tailstock Taper | #2 Morse |
Height | 44" (Adjustable) |
Weight | 650 lbs |
Tailstock Quill Travel | Over 4" |
3" Faceplate | standard |
14" Toolrest | standard |
Drive System | Poly V Belt, Inverter Drive |
Spindle Lock | standard |
Knock Out Rod | standard |
Drive Center | standard |
Ball Bearing (live) Center | standard |
Hole through Tail Stock Spindle | 3/8" |
Hole through Head Stock Spindle | 5/8" |
Footprint of stand | 50" L x 24" W |
NOTE: The above specifications were current at the time this manual was published, but because of our policy of continuous improvement, Powermatic reserves the right to change specifications without notice and without incurring obligations.
7
