Changing Cutter Speed

Referring to Figure 18:

The Model PM2700 Shaper is equipped with pulleys that allow you to change the spindle speed. The belt (B) placed on the upper pulleys (as shown in Figure 16) provides 7,500 RPM spindle speed. Placing the belt on the lower pulleys provides 10,000 RPM spindle speed.

To change speed (refer to Figure 16):

1.Disconnect the machine from the power source.

2.Open the door of the cabinet.

3.Remove the belt tension by moving the belt tension handle (A) to the unlock (left) position. This allows the motor (E) to swivel on its mounting hinge.

4.Move the drive belt (B) to the other set of grooves (C).

5.Lock the belt tension handle (A), securing the motor (E) and placing tension on the drive belt (C).

Drive Belt Tension

Referring to Figure 18:

The drive belt should have sufficient tension to prevent slippage when the machine is in operation. If the tension on the belt needs adjustment:

1.Disconnect the machine from the power source.

2.Open the door of the cabinet.

3.With a 17mm wrench, loosen the lock nut (G) on the belt tension assembly (refer to inset for loosening direction).

4.Adjust the hex bushing (F) with a 17mm wrench (refer to inset for adjustment direction) for proper tension on the belt (B). The tension handle (A) must be in the locked position (right) while performing this step.

Note: Two 17mm wrenches are required for the next step.

5.Maintain the position of the hex bushing (F) with one wrench while tightening the lock nut (G) with the other.

Figure 18

Belt Replacement

Referring to Figure 18:

Replace the drive belt (B) as follows:

1.Disconnect the machine from the power source.

2.Open the door of the cabinet.

3.Remove the belt tension by moving the belt tension handle (A) to the unlock (left) position. This allows the motor (E) to swivel on its mounting hinge.

4.Work the drive belt down all the way past the pulleys.

5.Continue sliding the belt down on the left side until it is free from the spindle (C), then remove the belt over the top of the motor pulley (D).

6.Install the new belt by following these steps in reverse.

17

Page 16 Page 18
Page 17
Image 17
Powermatic PM2700 operating instructions Changing Cutter Speed, Drive Belt Tension, Belt Replacement
Page 16 Page 18

PM2700 specifications

The Powermatic PM2700 is a powerful and versatile bandsaw designed to meet the needs of both professional woodworkers and enthusiastic hobbyists. This robust machine is known for its exceptional cutting performance, advanced features, and user-friendly design.

One of the standout characteristics of the PM2700 is its impressive motor. Equipped with a 3 HP, 230-volt motor, the bandsaw delivers ample power, ensuring that users can tackle even the most challenging materials with ease. The motor operates smoothly and quietly, which enhances the overall working experience.

The PM2700 features a precision-engineered cast iron frame, which provides stability and reduces vibration during operation. The cast iron table is a generous 21 inches by 27 inches, supporting large workpieces while maintaining accuracy in cuts. Additionally, the table incorporates a high-quality, tilting feature that allows for bevel cuts, expanding the functionality of the bandsaw.

An essential aspect of any bandsaw is its cutting capacity, and the PM2700 excels in this area. It offers a resaw capacity of 12 inches, allowing woodworkers to easily slice through thick material. The machine also features an adjustable blade tensioning system that enables quick and precise adjustments to achieve optimal blade performance.

The PM2700 is equipped with an advanced blade tracking system, which helps in maintaining correct blade alignment during operations. This feature significantly reduces the risk of blade wandering, resulting in cleaner cuts and enhanced accuracy. The easy-to-use blade change system further simplifies maintenance, allowing users to switch blades with minimal effort.

Another notable technology integrated into the PM2700 is the built-in digital readout that provides real-time feedback on blade height adjustments. This digital feature ensures that woodworkers can make precise and repeatable cuts with confidence.

For safety, the bandsaw comes with several important features, including a blade guard and quick-release mechanism. Additionally, its robust construction minimizes the risk of injuries associated with vibrations and instability.

Overall, the Powermatic PM2700 is a top-of-the-line bandsaw that combines power, precision, and safety features, making it an excellent choice for anyone serious about woodworking. With its heavy-duty construction and user-friendly design, it promises to deliver outstanding results and durability for years to come.
Top Page Image Contents