Short stock Never shape stock less than 12 inches in length without special fixtures. Where practical, shape longer stock and cut to size.

12 inch rule When shaping, never allow your hands to come closer than 12 inches to the cutters.

Hand safety Never pass the hands directly over, or in front of, the cutters (Figure A). As one hand approaches the 12 inch radius point, remove it (or the push stick) in an arc motion and reposition hands 12 inches beyond the cutters.

Blind cut When blind cutting, the workpiece is positioned on top of the template. This keeps the cutter(s) cutting only the underside of the workpiece and provides a "distance" guard for the operator.

Cutter Clearance With the power disconnected, always rotate the spindle by hand with any new set-up to ensure proper clearance with the cutters. At the same time, check to be sure the cutterhead is turning in the correct direction.

Stock feed Feed stock opposite to the direction of the cutter rotation (Figure B). Never back stock out of the cutter once the cut has been started. Instead, pull the stock straight out away from cutter and begin the cut again.

Guide pin Whenever possible, use a guide pin when performing pattern shaping and collar shaping operations.

Tool maintenance Clean and sharp tools give safer and better performance. Dull tools can cause kickbacks and excessive chatter. Before making a cut, always check the condition and adjustment of the tools. Never use a tool that is not balanced and rated for the selected RPM.

Spindle speed Do not operate tools at speeds higher than rated by the manufacturer.

Cutter selection Use only those cutters designed to be used on the machine, and mount only safety type cutters on the spindle.

Stock condition The danger of kicked-back stock can occur when the stock has knots, holes, or foreign objects such as nails. Warped or in-wind stock should first be jointed on one surface before attempting to use it on the shaper.

6

Figure A

Figure B

Page 6
Image 6
Powermatic PM2700 operating instructions Figure a

PM2700 specifications

The Powermatic PM2700 is a powerful and versatile bandsaw designed to meet the needs of both professional woodworkers and enthusiastic hobbyists. This robust machine is known for its exceptional cutting performance, advanced features, and user-friendly design.

One of the standout characteristics of the PM2700 is its impressive motor. Equipped with a 3 HP, 230-volt motor, the bandsaw delivers ample power, ensuring that users can tackle even the most challenging materials with ease. The motor operates smoothly and quietly, which enhances the overall working experience.

The PM2700 features a precision-engineered cast iron frame, which provides stability and reduces vibration during operation. The cast iron table is a generous 21 inches by 27 inches, supporting large workpieces while maintaining accuracy in cuts. Additionally, the table incorporates a high-quality, tilting feature that allows for bevel cuts, expanding the functionality of the bandsaw.

An essential aspect of any bandsaw is its cutting capacity, and the PM2700 excels in this area. It offers a resaw capacity of 12 inches, allowing woodworkers to easily slice through thick material. The machine also features an adjustable blade tensioning system that enables quick and precise adjustments to achieve optimal blade performance.

The PM2700 is equipped with an advanced blade tracking system, which helps in maintaining correct blade alignment during operations. This feature significantly reduces the risk of blade wandering, resulting in cleaner cuts and enhanced accuracy. The easy-to-use blade change system further simplifies maintenance, allowing users to switch blades with minimal effort.

Another notable technology integrated into the PM2700 is the built-in digital readout that provides real-time feedback on blade height adjustments. This digital feature ensures that woodworkers can make precise and repeatable cuts with confidence.

For safety, the bandsaw comes with several important features, including a blade guard and quick-release mechanism. Additionally, its robust construction minimizes the risk of injuries associated with vibrations and instability.

Overall, the Powermatic PM2700 is a top-of-the-line bandsaw that combines power, precision, and safety features, making it an excellent choice for anyone serious about woodworking. With its heavy-duty construction and user-friendly design, it promises to deliver outstanding results and durability for years to come.