Powermatic WP2412 operating instructions Introduction Description, Specifications

Introduction

This manual is provided by WMH Tool Group covering the safe operation and maintenance procedures for a Model WP2412 Powermatic Planer. This manual contains instructions on installation, safety precautions, general operating procedures, maintenance instructions and parts breakdown. This machine has been designed and constructed to provide years of trouble free operation if used in accordance with instructions set forth in this manual. If there are any questions or comments, please contact either your local supplier or WMH Tool Group. WMH Tool Group can also be reached at our web site: www.wmhtoolgroup.com.

Description

This multi-featured 15 horsepower planer is built for the rugged, industrial environment. It features a quick change TersaTM cutterhead with reversible knives, segmented infeed roller with sectional chip breaker, and dual drive chains and sprockets. The cutterhead and infeed and outfeed rollers have double bearings. The planer frame is built with heavy plate steel, and the cast iron table is supported by four massive columns – this machine will not vibrate under load. Knife changes are quick with the self-seating knives. The planer will accomodate rough to finish work, and multiple piece planing.

Specifications

Model Number	WP2412
Stock number	1791295
Main motor (TEFC)	15HP, 3Ph, 230V, 60Hz, 60A
Table raising motor (TEFC)	.0.75HP
Feed Motor (TEFC)	1HP
Variable feed speed (ft/min.)	16 to 72
Cutterhead speed (RPM)	5200 RPM
Cutterhead diameter (in)	4.75
Knives TERSATM (in)	four @ 25”
Max. chip removal single pass (in)	0.3125
Serrated infeed roller (in)	2.75
Outfeed rollers (in)	2.75
Table dimensions (in)	24.8 x 45.6
Thickness capacity (in)	12
Dust port (in)	6
Belts	three V-belts
Overall dimensions (in LxWxH)	58 x 48 x 43
Overall dimensions (crated) (in LxWxH)	63 x 53 x 49
Net weight (lbs)	2,310
Shipping weight (lbs)	2,640

The above specifications were current at the time this manual was published, but because of our policy of continuous improvement, WHM Tool Group reserves the right to change specifications at any time and without prior notice, without incurring obligations.

6