Precision Power DEQ-230 manual Input, Attenuation, Stereo/Mono Switch, Output

1.INPUT-

Connect RCA cables from your head unit or other signal source here.

2.Attenuation -

Push this switch in to accept high level RCA inputs (up to 8v) or direct speaker lead inputs from common grounded (not high powered) headunits. See diagram below for wiring.

3.Stereo/Mono Switch -

Push this switch IN to send Left Input to both channels of the DEQ-230for Mono operation. Leave the switch OUT for Stereo operation.

4.OUTPUT -

Connect RCA cables to your Preamp, Crossover or Amplifier here.

5.After connecting Ground, Remote, and Power wires, plug in the POWERLOCK™ connector here.

7