The DEQ-230’s detachable control panel design greatly simplifies system tuning. It allows real time adjustment of system equalization from the front seat or outside the vehicle. In order to operate the DEQ-230 in this mode, simply remove the Allen head screw (located to the right of the thumb notch on the front bezel) that holds the main control panel to the docking bay, and carefully remove the main control panel. You will notice that it is connected to the docking bay via a short eight conductor phone cord. Make sure that the power is off! Remove the control panel, disconnect the short cord at both ends and then replace it with the 20 ft. cable (supplied). After plugging the control panel into the docking bay, turn power back on, and begin your pink noise analysis, or make final adjustments to sound quality from the front seat.
