Precision Power MaxxBass manual Front Stereo Configuration

WIRING CONFIGURATIONS

The MaxxBass® Processor is recommended in two different configurations.

1. Front Stereo Configuration

The figure below illustrates the wiring for a front stereo configuration. One MaxxBass® Processor is used between the front channel source and front speaker amplifier to increase the bass response only on the front speakers.

Implementing MaxxBass® on the front speakers will increase the perceived bass response of these speakers down to 30-40Hz providing a Virtual Subwoofer. The listener will achieve better bass balance and imaging with a rear mounted subwoofer or trunk mounted speakers with sufficient bass response.

In-dash

CD Receiver

Front Rear

Maxx

Bass®

Power

Amplifiers

Front speakers

LF with Virtual RF SubwooferTM

LRRR

Subwoofer

9