3.Monitor and Maintenance
To enter into LEVEL2 in ADMIN MODE MENU, the PIN CODE is required (In the factory default setting, the PIN CODE is "0000").
PIN CODE entry screen |
|
ADMIN:PIN CODE |
|
PIN CODE? 0 _ _ _ | Enter the PIN CODE. |
To enter the PIN CODE, select each number by pushing [ + ] and [ - ] buttons and save it by pushing [SET] button. If a correct PIN CODE is entered, configuration menus are displayed. If a wrong PIN CODE is entered, the error message, "WRONG PIN CODE!" is displayed and the LCD menu returns to LEVEL 1.
Each configuration menu in ADMIN MODE MENU are explained as follows.
LCD CONTRAST
Sets a contrast for LCD. |
|
LCD CONTRAST screen |
|
LCD CONTRAST |
|
Enter a value. |
Select the value by pushing [ + ] and [ - ] buttons and determine it by pushing [SET] button.
NETWORK CONFIG
Configures the network settings.
NETWORK CONFIG (sample)
IP DHCP/BOOTP ENABLE
Selected menu
Current setting of the selected menu
Menu | Information |
IP DHCP/BOOTP | Displays whether DHCP/BOOTP are enabled or disabled. |
IP ADDRESS(CFG) | Displays an IP Address. |
IP SUBNET ADDR | Diplays a Subnet Mask. |
IP GATEWAY ADDR | Displays a Default Gateway Address. |
41