Silex technology MVDS X-1 manual Adjusting a screen image at transmitter

2.Installation

Adjusting a screen image (at transmitter)

Connect to the web page of the transmitter to adjust a screen image appropriate for the player.

If you are sure of what value to set for screen image, click Video/Audio/Data under Configuration and configure each setting. If you are not sure what values to set, you can use the auto-adjustment feature to automatically adjust the screen image.

The use of the auto-adjustment function is described below:

1.Output a still image (white or any other light color) from the player.

2.You can use the default values, however, if you want to make better adjustment, access the Video/Audio/Data Configuration page by clicking Video/Audio/Data under Configuration, and enter the following values.

Gain	32
Offset	160
Filter	15

3.Select Video/Audio under Tools and click the Start button next to Maintenance screen mode. Click the Stop button to take effect.

4.Select Video/Audio under Tools and click the Start button next to Video signal auto configuration. Auto-adjustment will begin. If the video signal is not scanned correctly or an error occurs, configure it manually.

25