Silex technology MVDS X-1 Video Config, VIDEO CONFIG sample, Selected menu, R 128 G, Vga Config

									3.Monitor and Maintenance
VIDEO CONFIG
	Shows or Configures the video settings.
	VIDEO CONFIG (sample)
						Selected menu
	CAPTURE GAIN	*
	R 128 G 128	B 128				Current setting of the selected menu
	Menu							Information
	AUTO CONFIG		Starts the auto-adjustment for image parameters.
			By pushing [SET] button, you can switch to the auto-adjustment screen.
			Push [ + ] and [ - ] buttons to select [OK] (the current setting is enclosed with [ ]).
			Push [SET] button to start auto-adjustment.
			VGA CONFIG
					CANCEL [ OK		]		Select [OK].
			The result is displayed in the lower line of LCD. The definition of each message
			is as follows:
				Message			Status
				COMPLETE & SAVED			Suceeded in VGA auto-adjustment.
				ERR: OUT RANGE			Failed in VGA auto-adjustment.
							Incorrect VGA signal is input.
							Check that the resolution and refresh note
							settings are respectively set to "1280x768" and
							"60Hz" in the player(s).
				ERR: NO VGA IN			Failed in VGA auto-adjustment.
							VGA signal is not input.
							Check that a VGA cable is properly plugged
							in or player(s) have proper settings to output
							video signals.
				ERR: SCAN FAILED			Failed in VGA auto-adjustment.
							Play another movie or still image at the
							player(s) and try the auto-adjustment again.
				ERR: N/A			VGA auto-adjustment unavailable
							VGA auto-adjustment is not available while
							this product is sending a maintenance screen.
							Stop sending a maintenance screen and try the
							auto-adjustment again.

43