Silex technology MVDS X-1 manual Before you begin, Necessary items

Models: MVDS X-1

1 76
Download 76 pages 24.53 Kb
Page 22
Image 22
2.1 Before you begin

MVDS X-1 User's Guide

2.1 Before you begin

This section explains the necessary actions that should be taken before you connect and setup this product.

2.1.1 Necessary items

Please prepare the following items.

MVDS Transmitter

One transmitter is required.

( X-1T )

 

MVDS Receiver

As many receivers as you need for your environment. Each receiver supports

( X-1R )

one monitor, and up to 32 receivers can be configured for use with a single

 

MVDS transmitter.

PC

A PC with a wired LAN (100BASE-T) port.

(used for setup)

 

Player

A media player with VGA interface and 1280x768 60Hz support (the player

 

can be a PC or any other device that can output video in the required format

 

using a VGA interface)

Monitor

A monitor with VGA interface and 1280 x 768 60Hz support (up to 32

 

monitors total)

Speaker

Up to 32 stereo speaker pairs (not necessary if the speaker is embedded in the

 

monitor above).

VGA cable

VGA cable (male/male) with D-Sub15 pin connector and noise suppression.

 

One cable is required for each transmitter and each receiver.

Audio cable

Cables with 3.5mm mini plug connector and noise suppression.

 

One cable is required for each transmitter and receiver.

LAN cable

Category 5 or better LAN cables for connecting the PC to the transmitter and

(used for setup)

to the receiver(s) for configuration purposes.

 

* Either straight cable or crossover cable can be used as Auto MDI-X is

 

supported.

 

* An Ethernet hub can be used, but is not required.

Antenna

An antenna is required for each transmitter and receiver. The MVDS

 

transmitters and receivers include 2dB antennas, but you may wish to use

 

more specialized antennas to provide better performance.

 

Select the antenna according to your location status, distance from the

 

receiver or layout.

 

The MVDS transmitters and receivers have 2 antenna terminals. You can use

 

both terminals as they automatically recognize which terminal is in use. The

 

antenna is not required during the installation.

Configuration Software

Use AdminManager. You can download AdminManager from the Silex

 

website:

 

http://www.silexamerica.com/adminmanager-software-download.html

16

Page 22
Image 22
Silex technology MVDS X-1 manual Before you begin, Necessary items