2.Installation
Adjusting a screen image (at receiver(s))
- You normally do not have to adjust a screen image at the receivers since the monitor will
TIP | automatically make adjustments. |
|
1.If adjustment is necessary, go to the Web page of the transmitter. Click Video/Audio under Tools and click the Start button next to Maintenance screen mode to switch to maintenance mode and output the maintenance screen to the receivers. The MVDS will automatically adjust the image quality and position, etc. of the monitor.
2.When the adjustment of the screen image for the monitor is complete, click Stop button to finish the maintenance mode.
3.If the adjustment does not go properly, click Video/Audio/Data under Configuration and configure each value manually.
- Configure each parameter appropriate for your monitor. If incorrect parameters are set, the
TIP | monitor may malfunction. |
|
27
