3.Monitor and Maintenance
Static Node (at transmitter)
Configures Static Node control of transmitter. Usually, the default settings are used.
| Name | Details | |
| Node List Method | Specify a node search method. | |
| Static Node 0 |
| |
| Static Node 1 |
| |
Node | Static Node 2 | Specify an IP address for node when Node List Method is set | |
Static Node 3 | |||
Configuration | |||
Static Node 4 | to Static. | ||
| |||
| Static Node 5 |
| |
| Static Node 6 |
| |
| Static Node 7 |
|
- Use this only for irregular situations such as when you need to specify the node for your
Note
network environment. Usually, the default settings are used.
<Static Node>
Use this when you specify receivers. Up to 8 receivers can be specified. <Dynamic Node>
Change the method of transmission to receiver.
59