2.Installation
Network configuration
* Required for both Transmitter and Receivers
Configure the IP address and wireless settings. Select Network under
Configuration in the Web page.
- The MVDS transmitter and receivers operate without the need to manually configure an IP TIP address as they supports Auto IP function.
- It is impossible to broadcast a movie across a router.
<DHCP, IP, Subnet, Gateway>
Configure these settings according to your network environment (by default, DHCP and the Auto IP function are enabled).
<Wireless>
Select Enable for the Wireless Interface. Select the options for Wireless Mode, SSID, WEP, etc. appropriate for your environment.
- Be sure to use WEP security, especially if you are using MVDS with a public wireless network.
TIP
23