Adjusting the Color Registration
Automatic color adjustment takes about two minutes. When it com- pletes, a check message is dis- played, and the display is returned to the color adjustment menu.
Completed
Color Regist.:
Auto Adjust
G When you have made all the set- tings, press {On Line}.
"Ready " appears on the panel dis- play.
Ready
Fuser Adjust
When replacing the fusing unit
Note
❒When "Toner is Almost Empty" 2 appears on the panel display, re- place the toner cartridge and per- form "Auto Adjust", and then perform the "Fuser Adjust".
Reference
⇒ P.3 “Replacing the Toner Car- | ||
tridge” |
|
|
⇒ P.34 “Auto Adjust” | ||
A Press {Menu}. |
|
|
On Line Menu |
| Escape |
Job Reset Form Feed |
| #Enter |
Power | Error | Data In |
|
| ZDJS001N |
"Menu" appears on the panel dis- play.
B Press {U} or {T} to display "Maintenance", and then press {Enter}.
Menu:
Maintenance
The maintenance menu is dis- played.
C Press {U} or {T} to display "Col- or Regist.", and then press {Enter}.
Maintenance:
Color Regist.
35
