Replacing the Fusing Unit
G Holding the green handle, pull up the Fusing Unit slowly in the direction of the arrow, and then put it in a stable and level place.
ZDJH208J |
H Take out the new Fusing Unit from the bag and put it in a stable and level place.
Important
❒The A3 paper which comes with the new Fusing Unit will be
used in a later step S, so be care- ful not to lose it.
I Remove the Fuser Oil Unit in the direction of the arrow.
ZDJH052E |
Important
❒Do not touch inside of the Fus- ing Unit.
❒Be careful not to touch the oil.
J Attach the Fuser Oil Unit re- moved in step I to the new Fus- ing Unit. Hold the Fuser Oil Unit in the manner shown in the illus- tration. Match (U) on the front of 1 the Fuser Oil Unit and (T) on the Fusing Unit at three places. While pushing the green lever on the
left side of the Fusing Unit (A), insert the left and right protru- sions of the Fuser Oil Unit into the white holders of the Fusing Unit (B), and move the Fuser Oil Unit in the direction shown by the arrow (C) to attach the Fuser Oil Unit to the Fusing Unit.
Important
❒Be careful not to get oil on the metal part of the left side of the Fuser Oil Unit
K Put the removed Fuser Oil Unit in the bag that enclosed the new Fusing Unit, and then seal it.
L Holding the green handle of the new Fusing Unit, use your other hand to push the area right in front of the handle to create a slight slant, and then push the Fusing Unit slowly to the back.
ZDJH050E |
Important
❒Confirm that the Fuser Oil Unit is facing the inside of the printer.
❒Confirm that the Fusing Unit is properly positioned in the ma-
chine.19
