Savin SLP38C manual Manual Adjust, Press # for Test Print Bypass, Set Sheet, then# A3 297 X, Ready

Clearing and Adjusting the Printer

Note

❒The current resolution is dis- played on the printer driver properties.

❒To adjust the color registration on thick paper, select "Thick: 600dpi" regardless of the cur-

2 rent resolution.

H Confirm that the following mes- sage is displayed, and then press

{Enter}.

Press # for Test

Print (Bypass)

The following message appears on the panel display. The size of the paper loaded in step A is shown.

Set Sheet, then#

A3 (297 X 420)

I Confirm that A4Lor larger paper is in the Bypass Tray, and then press {Enter}.

The Test Sheet is printed. See P.40 “Test Sheet Samples”

J Press {U} or {T} to make the off- set settings, and then press {En- ter}.

When such a clear (not smeared in red) square as the sample is:

•at its center position, select "0".

•shifted to the left, select "-1".

•shifted to the right, select "+1".

Select Action:

0: Exit

Select Action:

-1: Re-adjust

If you select "0: Exit", the printer re- turns to the previous menu.

If you select "-1" or "+1", the printer returns to step H. Keep adjusting until "0" is available.

K Press {On Line}.

"Ready " appears on the panel dis- play.

Ready

Manual Adjust

Important

❒Normally, do not perform manual color adjustment.

A Press {Menu}.
On Line Menu		Escape
Job Reset Form Feed		#Enter
Power	Error	Data In
		ZDJS001N

"Menu" appears on the panel dis- play.

B Press {U} or {T} to display "Main- tenance", and then press {Enter}.

Menu:

Maintenance

The maintenance menu is dis- played.

C Press {U} or {T} to display "Col- or Regist.", and then press {Enter}.

38

Select Action: +1: Re-adjust

Maintenance: Color Regist.