Replacing the Fusing Unit
S Confirm that the following mes- sage is displayed on the panel dis- play, and then load the A3 paper which comes with the Fusing Unit in the Bypass Tray.
Set Sheet in
Bypass, then #
A Open the Bypass Tray.
ZDJH202J |
BPull out the Bypass Tray Exten- sion, and then flip it open.
ZDJH203J |
C Slide the side guides outward (A), and then load paper until it stops with the print side up (B).
ZDJH204J |
D Adjust the side guides to the paper width.
1 |
ZDJH205J |
Important
❒Be sure to shuffle the paper before loading the stack onto the tray so multiple sheets are not fed in at one time.
T Confirm that the A3 paper which comes with the Fusing Unit is in the Bypass Tray, and then press {Enter}.
The printer prints 8 Test Sheet (A -
H). For details about Test Sheet, see P.40 “Test Sheet Samples”.
Note
❒It takes about a minute to start printing.
21
