Adjusting the Registration of the Trays
Adjusting the Registration of the Trays
You can adjust the registration of each tray. The vertical adjustment is used for all trays. Normally, you need not update the registration. But when the optional Paper Feed Unit or the Duplex Unit is installed, updating the registration is useful in some cases. The following procedure describes how to adjust Tray 3. You can use the same procedure to adjust the other tray as well.
D Print the test sheet to preview the settings.
A Confirm that "Test Sheet" is dis- played, and then press {Enter}.
2
Registration:
Prt. Test Sheet
B Press {U} or {T} to display the tray to adjust, then press {Enter}.
A Press {Menu}. |
|
| Prt. Test Sheet: |
|
|
| Tray 3 |
|
|
| E Confirm the position of the image |
On Line Menu |
| Escape | to test sheet, and then adjust the |
Job Reset Form Feed |
| #Enter | registration value. |
Power | Error | Data In |
|
|
|
| ZDJS001N |
"Menu" appears on the panel dis- play.
B Press {U} or {T} to display "Maintenance", and then press {Enter}.
Menu:
Maintenance
C Press {U} or {T} to display "Reg- istration", and then press {Enter}.
Maintenance:
Registration
The following are examples for ad- justing the margin on the test sheet.
APress {Escape}.
BPress {U} or {T} to display the "Adjustment", and then press
{Enter}.
Registration: Adjustment
43
