2.Clearing and Adjusting the Printer
Cautions to Take When Cleaning
RWARNING:
• Do not remove any covers or screws other than those spec- ified in this manual. Some parts of the machine are at a high voltage and could give you an electric shock. Also, if the ma- chine has laser systems, direct (or indirect) reflected eye contact with the laser beam may cause serious eye damage. When the machine needs to be checked, adjusted, or re- paired, contact your service representative.
•Do not take apart or attempt any modifications to this ma- chine. There is a risk of fire, electric shock, explosion or loss of sight. If the machine has laser systems, there is a risk of serious eye damage.
RCAUTION:
•When removing misfed paper, do not touch the fusing section be-
cause it could be very hot.
Clean the printer periodically to maintain fine printing.
Dry wipe the exterior with a soft cloth. If dry wiping is not enough, wipe with a soft, wet cloth that is wrung out well. If you still cannot remove the stain or grime, use a neutral detergent, then wipe over with a
Important
❒To avoid deformation, discoloration, or cracking, do not use volatile chemi- cals, such as benzine and thinner, or spray insecticide on the printer.
❒If there is dust or grime inside the printer, wipe with a clean, dry cloth.
31