Replacing the Fuser Oil Unit
G Holding the green handle, pull up the Fusing Unit slowly in the direction of the arrow.
ZDJH208J |
Important
❒Do not touch any areas other than the handle.
H Put the removed Fusing Unit in a stable and level place.
I Lift the Fuser Oil Unit in the di- rection of the arrow to remove it, and put it in a stable and level place.
ZDJH052E |
J Take out the Fuser Oil Unit from the bag, and remove seal (A), and then remove seal (B) as shown in the illustration.
1 |
ZDJH053J |
Note
❒Be sure to remove seal (A), and then pull it out in a level man- ner.
Important
❒Be sure to remove the seals to avoid printer malfunction.
❒Be sure to remove seal (A) first, and then remove seal (B) to avoid oil leak.
❒Be sure to put the Fuser Oil Unit in a stable and level place to avoid oil leak.
❒There is oil on the removed seals and fuser oil roller. Be careful not to let them come in contact with your clothes.
Important
❒Do not touch inside of the Fus- ing Unit.
❒Be careful no to touch the area other than the shown in the il- lustration.
7