Replacing the Development Unit
F Lift the inner cover until it clicks into place and holds.
ZDJH016J |
The Development Unit is installed shown in the illustration. Starting from the upper left, the units are attached in the order of black (K), yellow (Y), cyan (C), and magenta
(M).
Important
❒Pulling out the Development Unit quickly might cause it to drop.
B Hold the right side of the De- | 1 |
velopment Unit with your right hand, and pull out the unit slowly.
ZDJH993J
H |
ZDJH046J |
G Remove the Development Unit.
The procedure for removing the unit is the same for all four colors.
Important
❒Be careful not to touch the right side of the Photocon- ductor Unit.
❒Be careful not to let it get in contact with your hands or clothes.
Install a new Development Unit.
The procedure for attaching the Development Unit is the same for all four colors.
A Take the unit out from the bag.
A Hook your finger on the green tab in front of the Develop- ment Unit you want to replace, and pull it out halfway.
ZDJH226J |
ZDJH225J
15