Adjusting the Color Registration
D Press {U} or {T} to display "Man- ual Adjust", and then press {En-
ter}.
Color Regist.:
Manual Adjust
E Confirm that "Print" is displayed in the menu for printing the Test Sheet, and then press {Enter}.
Test Sheet:
The Test Sheet is printed. See P.40 “Test Sheet Samples”.
F Enter the corrective values for A through L on the Test Sheet in or- der.
❒You can adjust the color alignment for each color in the range of
❒There is an area on the Test Sheet for you to put down the values of "A" through "L".
BPress {Enter}.
C Make the settings for "B" to "L" | 2 |
in the same manner, using steps A and B.
D When you finish the settings up to "L", press {Enter} in the next menu.
Manual Adjust:
Print Result
The Test Sheet is printed. See
P.40 “Test Sheet Samples”.
Adjustment A: (-7.0 +7.0) +0
Note
❒Confirm the printed Test Sheet to enter the correction values.
A Use {U} or {T} to enter the value
Adjustment A: (-7.0 +7.0) +2
Note
❒Pressing {U} or {T} increas- es or decreases the value in 0.5 units.
❒Sometimes, there are two of the whitest squares next to each other. For example, if the two squares of "+1" and "+2" are the whitest, enter "+1.5".
Printing...
E Confirm that square "0" is the whitest within A through L on the printed Test Sheet.
Note
❒If a square other than "0" is the whitest, redo the proce- dure from step D.
The display is returned to the manual adjustment menu.
Color Regist.:
Manual Adjust
G When you have made all the set- tings, press {On Line}.
"Ready " appears on the panel dis- play.
Ready
39