Adjusting the Color Registration
When color shifting occurs
Perform this procedure when color shifting occurs even after performing "Auto Adjust".
A Load A4L or larger paper in the Bypass Tray.
Note
❒Be sure to select paper size in the "Paper Input" menu.
Reference
For details about paper size and the procedure for loading paper in the Bypass Tray, see "Loading Paper" in Maintenance Guide 2.
B Press {Menu}. |
|
|
On Line Menu |
| Escape |
Job Reset Form Feed |
| #Enter |
Power | Error | Data In |
|
| ZDJS001N |
"Menu" appears on the panel dis- play.
C Press {U} or {T} to display "Maintenance", and then press {Enter}.
Menu:
Maintenance
The maintenance menu is dis- played.
D Press {U} or {T} to display "Col- or Regist.", and then press {Enter}.
Maintenance:
Color Regist.
E Press {U} or {T} to display "Fus- er Adjust", and then press {Enter}.
Color Regist.:
Fuser Adjust
Important
❒ When the toner cartridge is al- 2 most empty, or Auto Adjust is
not finished, the following mes- sage appears on the panel dis- play and "Fuser Adjust" is not available.
Cannot Adjust
See User’s Guide
Confirm that the toner cartridge is installed. The toner cartridge must be installed. See P.3 “Replacing the Toner Cartridge”.
If the toner cartridge is installed, perform "Auto Adjust". See P.34 “Auto Adjust”.
F Press {U} or {T} to display "Cus- tom Adjust", and then press {En- ter}.
The following message appears on the panel display.
Fuser Adjust:
Custom Adjust
G Press {U} or {T} to display the paper types and resolution in which color shifting occurs, and then press {Enter}.
Custom Adjust:
Plain: 600dpi
Select a value from "Plain: 600dpi",
"Plain: 1200dpi" and "Thick: 600dpi".
37
