14

Assembling and Maintaining the 835 Climber

Important: When wrench tightening, the head of the fastener should be flush with the product. If it is not, cross-threading has occurred. Do not attempt to rework the assembly as more damage to the equipment will occur. Contact Customer Support. Refer to Obtaining Service.

If you plan to move the unit, obtain help and use a hand truck. Do not grasp any plastic parts while lifting or moving the unit. The plastic parts are not capable of supporting the weight of the unit and they may break.

Hardware Kit (not to scale)

Fasteners

Quantity

Washer (⁵₁₆-inch inside

4

diameter, 0.688-inch outside

 

diameter)

 

Buttonhead screw (¹₂-inch)

6

Hex head screw (1-inch)

4

Sockethead cap screw

2

(1¹₄-inch)

 

Phillips-head screw (³₄-inch)

3

End cap

2

Lower handrail boot

2

Page 16
Image 16
Precor 835 warranty Hardware Kit not to scale, Fasteners