Precor CW-113 manual Preparations, Review the Important Safety Instructions

CW-113 Assembly and Maintenance Guide

1Preparations

The CW-113 parts are inspected before shipment. Each unit contains several pieces that require assembly. You will need to obtain adult assistance during the assembly process.

Unpacking the Equipment

When you open the box, carefully unpack the pieces and lay them on the floor near the location where you plan to use them.

CAUTION: Be careful when you use a utility knife to remove the packaging material. Do not cut the upholstery or scratch the paint.

If any items are missing, contact the dealer from whom you purchased the unit. For more information, refer to Obtaining Service.

Required Tools

Tools that you need to obtain before assembling the unit include:

❏Wire cutter or utility knife

❏¾-inch open end wrench

❏3⁄32-inch Allen wrench

Installation Requirements

Follow these installation requirements when assembling the unit:

•Review the Important Safety Instructions.

•Assemble the unit where it will be used.

•Install components in the sequence shown.

•Insert all fasteners in the same direction. For aesthetic purposes, insert all the fasteners in the same direction unless specified (in text or illustrations) to do otherwise.

•Leave room for adjustments. Tighten fasteners to keep the unit stable, but leave room for adjustments.

Preparations

page 5