Precor CW-113 manual Assemble the Unit

CW-113 Assembly and Maintenance Guide

Assemble the Unit

1.Attach the Main Frame to the Stabilizer using four ¾-inch buttonhead screws (A)

four ³⁄₈-inch split washers (B) Wrench tighten.

Note: Make sure the wheels on the Stabilizer are positioned as shown in the illustration.

2.Attach two Spring Cushions to the Main Frame using

two 2¾-inch buttonhead screws (C) two ³⁄₈-inch split washers (B)

two ³⁄₈-inch washers (D) Wrench tighten.

3.Insert two Springs onto the Spring Cushions.

4.Turn the Back Support over and attach the Back Adjustment to the Back Support using

four ¾-inch buttonhead screws (A) four ³⁄₈-inch split washers (B) Wrench tighten.

	4 - ¾" buttonhead screws
	4 - split washers
Spring Cushion
2	- 2¾" buttonhead screws
2	- washers
2	- split washers
2	- Spring Cushions
	4 - ¾" buttonhead screws
	4 - split washers

Assemble the Unit

page 8