Precor M 9.1 Maintaining Your Treadmill, Cleaning the Equipment, Aligning the Running Belt

Models: M 9.2s M 9.1

1 32
Download 32 pages 28.12 Kb
Page 29
Image 29

6

Maintaining Your Treadmill

The M9.1 or M9.2s Precision Electronic Treadmill requires little maintenance to keep it running

smoothly and efficiently. However, the customer is responsible for the typical maintenance tasks

such as, cleaning the treadmill and adjusting the running belt. If you fail to maintain the treadmill

as described below, it could affect or void the Precor limited warranty.

CAUTION: Turn OFF the treadmill and disconnect the power cable before performing most maintenance tasks.

CAUTION: Special care must be taken when aligning the running belt. Turn OFF the treadmill while adjusting or working near the rear roller. Remove any loose clothing and tie back your hair. Be very careful to keep your fingers or any other object clear of the belt and rollers, especially in front of the roller and behind the deck. The treadmill will not stopimmediately if an object becomes caught in the belt or rollers.

CAUTION: If you hear a chafing sound or the belt begins to tear or fray, stop the running belt immediately by pressing the STOP key or pulling the magnetic safety key off of the ACTIVATE position. Contact your Precor service representative.

Cleaning the Equipment

Your Precor treadmill relies on low friction for efficient operation. To keep the friction low, the treadmill must be as clean as possible.

Before a workout, use a damp, soft, clean cloth to clean the side platforms and running bed, (refer to the callouts in Diagram 15 on page 24). This removes any dirt or dust that might affect the smooth operation of the treadmill.

Vacuum the floor underneath the unit every week to prevent the accumulation of dust and dirt on the running belt.

To periodically clean the treadmill’s frame, electronic console, and running belt use a solution of mild soap and water and dampen a clean cloth. To clean the running belt and the groves on the plastic trim strip, use a soft nylon scrub brush. Never pour water or spray liquids on the electronic console. Allow the treadmill to dry completely before using it.

Manually advance the running belt to clean the opposite side. Do not clean the belt while the running belt is moving. Liquid can splash onto the motor causing damage to the equipment and possibly injuring you.

Aligning the Running Belt

Before aligning the running belt, check its operation by following the procedure in Checking the Alignment of the Running Belt earlier in this manual. If you determine that the belt needs adjust- ment, follow the instructions here.

Realigning the belt takes a few simple adjustments. If you are unsure about this procedure, call your authorized Precor dealer for service (see Obtaining Service on page 25).

Follow the steps on the next page to adjust the running belt on the treadmill. To ensure your safety, make all adjustments while the treadmill is OFF.

1.Make sure the treadmill is OFF and the running belt has completely stopped.

2.Locate the left belt adjustment bolt at the rear of the treadmill. See Diagram 15 on the next page. The direction you turn the bolt depends on how the belt is tracking. Make all belt adjustments on the left rear corner bolt using the hex key (H) provided.

If the belt is off center to the LEFT, turn the adjusting bolt 1/4 turn clockwise, which moves the running belt to the right.

If the belt tracks off center to the RIGHT, turn the bolt 1/4 turn counterclockwise; this moves the belt to the left.

Important: Do not turn the adjusting bolt more than 1/4 turn at a time. Overtightening the bolt can damage the treadmill.

3.Place the magnetic safety key in the ACTIVATE position and turn ON ( I ) the treadmill, answer the start-up prompts, then increase the running belt speed to 2 miles per hour by pressing the SPEED key.

4.Observe the running belt for a couple of minutes. The belt should track centered on the running bed.

page 23

Page 29
Image 29
Precor M 9.1, M 9.2s owner manual Maintaining Your Treadmill, Cleaning the Equipment, Aligning the Running Belt

M 9.2s, M 9.1 specifications

The Precor M 9.1 and M 9.2s are sophisticated fitness machines designed to elevate workout experiences for users seeking effective cardiovascular training. Both models showcase Precor's commitment to quality, innovation, and performance, making them ideal choices for both home gyms and commercial fitness centers.

One of the standout features of the Precor M 9.1 is its ergonomic design that promotes comfort during use. The unit is equipped with a broad, cushioned footbed that reduces the impact on joints while still providing a robust workout. This design not only enhances user comfort but also encourages longer workout sessions, allowing fitness enthusiasts to push their limits without the risk of discomfort or injury.

The M 9.2s model takes comfort a step further, featuring an upgraded display console that offers intuitive controls and personalized workout programs. Users can easily navigate through various exercise modalities, including steady-state training, interval workouts, and heart-rate-based sessions. This versatility enables individuals to tailor their workouts to suit their fitness levels or specific goals.

Both models utilize Precor's renowned resistance technology, providing a smooth and consistent experience during workouts. The resistance levels can be easily adjusted, catering to users of all fitness levels, from beginners to advanced athletes. This adaptability is particularly beneficial in a shared gym environment where multiple users have different fitness backgrounds and goals.

An essential characteristic of the M 9.1 and M 9.2s is the integration of advanced monitoring systems. These consoles feature in-depth tracking capabilities, allowing users to monitor metrics such as heart rate, calories burned, and workout duration. Such data not only keeps users motivated but also empowers them to assess their progress and make informed adjustments to their fitness regimens.

Additionally, both models are designed with durability in mind. Constructed from high-quality materials, they are built to withstand the rigors of daily use, making them perfect for high-traffic gym environments. This durability is complemented by a low-maintenance design, with parts that are easy to access and replace if necessary.

In summary, the Precor M 9.1 and M 9.2s are impressive fitness machines that combine comfort, durability, and advanced technology. With a focus on user experience, personalized workouts, and performance tracking, they are excellent choices for anyone looking to enhance their cardio routines, whether at home or in a commercial setting. As fitness continues to evolve, these models remain at the forefront of innovative exercise solutions.