Precor none manual Pivot tube compartment so it is not hanging

Cardio Theater Integrated Bracket Assembly Instructions

6.Fully tighten the bottom two screws.

Use a Phillips-head screwdriver to fully tighten the bottom two screws. Leave the top two screws finger tight.

7.Connect the coaxial/power cable connectors to the LCD Screen.

Attach the connectors—coaxial and power—to the back of the LCD screen.

8.Feed the DVD connector back into the pivot tube compartment so it is not hanging out. The DVD Option is not available for the treadmill.

9.Connect the controller cable.

Attach it to the back of the LCD Screen. You will hear a definite click as the connector snaps into place inside its receptacle.

Note: For more information about cable connections, see the Cardio Theater LCD Screen manual.

6	7
		Power
		connector
	Coaxial	DVD
	cable
		connector
	Controller
	cable	Pivot tube
	8	Note: Feed the DVD connector back into the
		pivot tube compartment so it is not hanging
		out. The DVD Option is not available with the
		treadmill.

9

Controller

cable

Attach the LCD Screen

page 11