Cardio Theater Integrated Bracket Assembly Instructions
4.Attach the power extension cable to the power connector.
5.Set the bracket assembly aside.
6.Remove the fasteners that secure the display console to the treadmill.
Use a hex key to remove the four screws and washers that secure the display console to the upright supports on the treadmill. Keep the washers on the screws and set them aside.
Important: Ask someone for help before attempting the next step.
7.Position the bracket assembly.
Ask your assistant to lift the bracket assembly and position it parallel along the back of the display console.
8.Thread the coaxial/power cable through the left upright support.
While your assistant holds the bracket assembly, carefully lift the left side of the display console to expose the slot at the bottom edge of the console. Thread the coaxial/ power cable with its two connectors (and power extension cable) through the slot and down into the left upright support. Continue feeding the cable through the upright support until both cable connectors exit the opening at the base.
4 | 6 |
|
| Power | Display console |
|
| |
| connector |
|
| Power extension | Upright support |
|
| |
| cable |
|
| 8 | Display console |
7 | Display console |
|
| Bracket |
|
| assembly |
|
|
| Coaxial/ |
|
| power |
|
| cable |
|
| Left upright |
|
| support |
Install the Bracket Assembly
page 8
