Precor UBK 800-SERIES warranty Upright support insertion

18 Assembling and Maintaining UBK 800-Series Upright Exercise Bikes

Note: If the support is positioned correctly, it rests on a metal tab in the upright support channel.

Figure 5: Upright support insertion

Important: In the following step, be extremely careful not to trap or pinch any of the cables between the mounting screws and their seats.

6.Insert the two upright support mounting screws through the openings on the support and into the screw holes on the body assembly. Tighten the mounting screws completely using a ³₈-inch hex wrench.

Figure 6: Bolting the upright support into place

Important: In the following two steps, be extremely careful not to trap or pinch any of the cables between the bike frame and any of the covers.

7.Reposition the left side cover on the body assembly, then reattach and tighten the #10 x 1-inch self-tapping screws holding it in place.

8.Repeat the previous step to reinstall the top and rear covers.