Premier Mounts GB-PLEN1 installation instructions Installation Instructions, Page, Step

GB-PLEN1

You may wish to pre-install your electronic components inside the enclosure at this time. If so, make sure to leave the mounting slots accessible.

Mounting

Points

M5 x 10mm Screws

Step 5.	Locate	the	four (4)	mounting	holes
	on the mounting rails.
Step 6.	Align	the	mounting	slots on	the
	GB-PLEN1 with the mounting holes on
	the mounting rails.
Step 7.	Use four (4) M5 x 10mm screws to attach
	the GB-PLEN1 to the mounting rails.

Mounting

Rails

Installation Instructions Page 5