Premier Mounts GB-PLEN1 installation instructions Completed Attachment, Completed Installation

GB-PLEN1

If you did not pre-install electrical components, then you may now install all power and signal equipment. A qualified electrician should make any power connections to the GB-PLEN1.

M5 x 10mm

Screws

Completed Attachment

Padlock Hasp (optional)

Step 6. Place the padlock hasp on the inside of the GB-PLEN1 (optional).

When attaching the padlock hasp, make sure the flat side is resting against the inside wall of the GB-PLEN1.

Step 7. Use two (2) M5 x 10mm Phillips screws to attach the padlock hasp to the GB-PLEN1.

Step 8. Place the cover lid onto the GB-PLEN1 and secure using four (4) M5 x 10mm screws and tighten with a Phillips head screwdriver.

The cover lid may be mounted facing either direction.

Cover Lid

M5 x 10mm

Screws

Page 8

Completed Installation

Installation Instructions