Premier Mounts PBM-070L Projector Bracket Installation, Installation Manual, Page, Screwdriver

PBM-070L

Projector Bracket Installation

M8 x12mm Phillips

Head Screws

Projector Bracket

Screwdriver

Projector

M8 x12mm Phillips Head Screws

Step 1. Invert the projector and place it on a soft and flat surface. Step 1. Using a screwdriver, secure the mounting bracket using

Remove any foot levelers that might possibly prevent the	eight (8) M8 x 12mm Phillips Head screws.
correct installation of the bracket.	Do not over-tighten these screws. Over-tightening
Step 2. Locate the eight mounting points located on the bottom of
	the screws may result in damaging the threaded
the projector.
	inserts on the projector.
Step 3. Line up the mounting points on the projector with the
mounting holes on the mounting bracket.

Installation Manual Page - 4 -