C
L
Align the
Mounting Brackets
Inverted
Flat Panel
Step 3. Match the center of viewing guide with the center line you marked in step 1.
Bottom of
Flat Panel
Mounting Bracket
Center of
Viewing Guide
Center Line
The mounting brackets are designed with a center viewing guide on the side to indicate the center of the bracket.
Griplate™ Installation
Dimples
M8
M6
M5
M4
Phillips Head Screwdriver
Griplates™ have M4, M5 M6 and M8 hole patterns to fit the hardware that your flat panel requires.
EXAMPLE: If your flat panel uses M8 x 20 Phillip screws, use the M8 mounting points.
The upper Griplate™ must be mounted with the dimples facing up. The lower Griplate™ must be mounted with the flat side facing up.
DIMPLES
FACING UP
Do not over tighten the mounting hardware.
DIMPLES
FACING UP
DIMPLES
FACING DOWN
DIMPLES
FACING DOWN
Step 1.
Step 2. Once the mounting brackets are aligned secure the Griplate™ to the flat panel.
Both M6 x 30mm screws must be threaded into place 1/8” of an inch. Do not thread screw past 1/8”.
Page 7 | Installation Manual |
